DelPAC® 2000
DelPAC® 2000 is a widely accepted polyaluminum chloride that is known for its cost-effective ability to improve finished water quality. As a coagulant, it can offer longer filtration runs, minimize or eliminate the need for pH adjustment with alkalis, and reduce sludge residuals. It complies with American Water Works Association Standard B408-18 and NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals
At the upper end of the basicity range, minimal pH depression, can be used in high pH systems.Used in TOC reduction, metals removal, FOG.Used in water treatment as a primary coagulant for the removal of turbidity, color, suspended solids, heavy metals, and phosphorus.
Color Removal, Drinking Water Treatment, Heavy Metals Removal, Industrial Water Treatment, Phosphorus Removal, Suspended Solids Removal, TOC Removal, Turbidity Removal, Wastewater Treatment, Water Treatment
DelPAC 2000 must be administered directly into raw water, wastewater, or stock flow using an appropriate acid-resistant dosing pump. It is advised against diluting the product before its administration. The dosing system should be set up to ensure thorough mixing. The ideal dosage should be determined on a case-by-case basis, such as through laboratory testing. For guidance on usage, you are welcome to reach out to the USALCO team at any time.
Tanks may be constructed of fiberglass/epoxy, or lined steel. Polypropylene or polyethylene tanks have also been used. Schedule 80 PVC or polymer lined piping can be used. Glass reinforced plastic or hard rubber are also suitable materials for piping.
Aluminum Compounds, Sulfates
Coagulant
- NSF Approved
- NSF/ANSI 60
- NSF/ANSI/CAN 60
39290-78-3