DelPAC® 3030
DelPAC® 3030 Polyaluminum Chloride is an advanced aluminum-based coagulant used for municipal drinking, wastewater treatment, as well as for the treatment of industrial process water. When used as a coagulant, it can provide longer filter runs, reduce or eliminate the need for alkali pH adjustment chemistry, and minimize coagulant sludge residuals. It also helps in the removal of suspended and dissolved matter, such as organics and phosphorus.
At the upper end of the basicity range, minimal pH depression, can be used in high pH systems.Used in TOC reduction, metals removal, FOG.Used in water treatment as a primary coagulant for the removal of turbidity, color, suspended solids, heavy metals, and phosphorus.
Color Removal, Drinking Water Treatment, Heavy Metals Removal, Industrial Water Treatment, Phosphorus Removal, Suspended Solids Removal, TOC Removal, Turbidity Removal, Wastewater Treatment, Water Treatment
DelPAC 3030 must be administered directly into raw water, wastewater, or stock flow using an appropriate acid-resistant dosing pump. It is advised against diluting the product before its administration. The dosing system should be set up to ensure thorough mixing. The ideal dosage should be determined on a case-by-case basis, such as through laboratory testing. For guidance on usage, you are welcome to reach out to the USALCO team at any time.
Tanks may be constructed of fiberglass/epoxy, or lined steel. Polypropylene or polyethylene tanks have also been used. Schedule 80 PVC or polymer lined piping can be used. Glass reinforced plastic or hard rubber are also suitable materials for piping.
Aluminum Compounds, Aluminum Salts, Chlorides, Sulfates
Coagulant
- American Water Work Association (AWWA) Certified
- NSF Approved
- NSF/ANSI 60
- NSF/ANSI/CAN 60
39290-78-3